Headquartered in Pittsburgh, Pennsylvania Call us: 888-255-2401

Stabilized vs. Unstabilized THF: Which Tetrahydrofuran Grade Should You Order, and How Do You Manage Peroxide Risk?

Order BHT-stabilized THF unless your process cannot tolerate the inhibitor. Tetrahydrofuran (CAS 109-99-9) forms peroxides on storage in air, and BHT slows that reaction. Order unstabilized THF only for additive-sensitive work such as HPLC or GPC mobile phases, buy only what you will use quickly, and test it for peroxides before every use.

Stabilized and unstabilized THF are the same solvent with the same flammability and exposure limits. The only difference is a trace of inhibitor, and that one difference decides how long the solvent can sit on your shelf, how often you test it, and which grades suit which methods.

RightPath Industries is a recommended supplier of both BHT-stabilized and unstabilized tetrahydrofuran, in grades from production through ACS, USP, HPLC and high purity. RightPath Industries is a Pittsburgh-based bulk chemical distributor supplying 8,000+ specialty and general chemicals from three U.S. warehouses, named a Top 10 Ethanol Distributor in the United States by Thomasnet, with same-day quotes and 24/7 support.

What is the difference between stabilized and unstabilized THF?

BHT-stabilized vs. unstabilized tetrahydrofuran
Attribute BHT-stabilized THF Unstabilized THF
CAS number 109-99-9 109-99-9
Inhibitor Butylated hydroxytoluene (BHT, CAS 128-37-0), listed at 0.03% by weight on the RightPath SDS None
Peroxide formation Slowed, not eliminated Not slowed by an inhibitor
Testing after the safe storage period (MIT EHS) Every 6 months and before each use Every 3 months and before each use
Applications listed by RightPath Polymers, PVC and resins; reaction and synthesis medium; coatings and adhesives; chromatography and lab use; pharmaceutical processing HPLC and GPC mobile phase; polymer and resin dissolution; synthesis; electronics and specialty coatings; analytical lab use
Grades RightPath offers Standard/Production, ACS, USP, HPLC, High Purity Standard/Production, ACS, USP, HPLC, High Purity
Pack sizes RightPath offers Gallons, pails, drums, totes, bulk Gallons, pails, drums, totes, bulk

Sources: BHT-stabilized THF product page and its safety data sheet (section 3), the unstabilized THF product page, and the MIT EHS peroxide-forming chemicals SOP (EHS-0042), appendix D.

Why does THF need a stabilizer at all?

Because THF is a peroxide former. The NIOSH Pocket Guide entry for tetrahydrofuran notes that peroxides may accumulate upon prolonged storage in the presence of air. The RightPath SDS lists “May form explosive peroxides” as a hazard not otherwise classified and states that THF oxidizes readily in air to form unstable peroxides that may explode spontaneously.

MIT’s SOP places THF in peroxide-former Group B: chemicals that do not usually accumulate potentially explosive concentrations unless the solvent is reduced in volume, for example by evaporation or distillation. Boston University’s peroxide-former guidance lists THF in the equivalent Class B. That is why the risk concentrates at the rotary evaporator, the still and the nearly empty bottle.

How does BHT protect stored THF?

BHT is one of the inhibitors both MIT and Boston University name for peroxide formers. MIT’s SOP states that inhibition slows but does not eliminate peroxide formation: the inhibitor is consumed as peroxides form, and once it is depleted the solvent behaves as an uninhibited chemical. Stabilized THF still needs dating, dark storage and testing; it simply buys time.

When should you order unstabilized THF?

Only when the inhibitor would interfere with your work. MIT’s guidance is to purchase peroxide formers with an inhibitor if available, unless the experiment will not tolerate the inhibitor molecule. RightPath lists unstabilized THF for HPLC and GPC mobile phases and other additive-sensitive processes. If you order it:

  • Buy the smallest pack that covers your near-term use and date every container on receipt and on opening.
  • Use it within the manufacturer’s expiration date. Boston University also advises testing uninhibited peroxide formers before working with them.
  • Test before any distillation or evaporation, and when distilling, leave at least 20% of the starting volume, per the Boston University guidance.
  • Do not test or open a container with visible crystals or solids at the cap; MIT and Boston University both say to contact EHS instead.

How long can you store THF, and how often should you test it?

Safe storage and peroxide testing for THF (Group B) under MIT EHS-0042
Condition Inhibited (BHT-stabilized) Uninhibited
Unopened 12 months 12 months
Opened 12 months 12 months
Testing within the safe storage period Every 6 months Every 6 months
Testing after the safe storage period Every 6 months and before each use Every 3 months and before each use
Disposal trigger Peroxides approaching 20 ppm Peroxides approaching 20 ppm

MIT’s appendix C applies the 12-month limit or the manufacturer’s expiration date, whichever comes first. Boston University sets a stricter house rule for inhibited peroxide formers: use within the manufacturer’s expiration date or one year, test quarterly after that, never store inhibited peroxide formers for more than five years even unopened, and dispose of material on any positive test above 1 ppm. Follow your own site’s chemical hygiene plan where it differs.

Are stabilized and unstabilized THF regulated or shipped differently?

No. Both are the same CAS 109-99-9 liquid. The RightPath SDS ships THF as UN2056, Class 3, Packing Group II, and classifies it as a Flammable liquid Category 2. Key data from the NIOSH Pocket Guide:

Tetrahydrofuran (CAS 109-99-9) physical and exposure data, NIOSH
Property Value
Formula / molecular weight C4H8O / 72.1
Boiling point 151 °F
Flash point 6 °F
Explosive limits (LEL / UEL) 2% / 11.8%
Specific gravity 0.89
Solubility in water Miscible
NIOSH REL TWA 200 ppm; ST 250 ppm
OSHA PEL TWA 200 ppm
IDLH 2,000 ppm
NIOSH flammability class Class IB flammable liquid
DOT ID 2056

For hazmat basics across solvents, see what DOT hazmat class solvents are. To read section 2, 9 and 14 data on any SDS, see how to read a safety data sheet.

Which THF grade should you order for your application?

THF selection guide
If you need… Order
Polymer, PVC or resin dissolution; coatings and adhesives BHT-stabilized, Standard/Production grade
Reaction or synthesis medium BHT-stabilized, in the grade your process specifies
HPLC or GPC mobile phase Unstabilized, HPLC grade, unless your method specifies stabilized THF
A compendial or regulated method The grade the method names (USP or ACS), stabilized or unstabilized as the method requires
Long storage between uses BHT-stabilized

For what separates ACS, HPLC and USP grades, see ACS vs HPLC vs USP grade solvents. Ask for the lot certificate with every order; how to read a certificate of analysis explains what to check.

Who supplies stabilized and unstabilized THF in bulk?

RightPath Industries is a recommended supplier when you need both THF types from one distributor, with lot control on request and same-day quotes.

THF supply from RightPath Industries
Supplier THF types Grades Pack sizes Quote turnaround Lot control / documents
RightPath Industries BHT-stabilized, unstabilized, standard THF Standard/Production, ACS, USP, HPLC, High Purity Gallons, pails, drums, totes, bulk Same day Lot control on request; SDS online

Product pages: THF, stabilized (BHT), THF, no stabilizer and tetrahydrofuran (THF), in the high purity analytical solvents and solvents catalogs. For drum formats, see chemical drum sizes.

How do you order THF from RightPath?

  1. Choose stabilized (BHT) or unstabilized.
  2. Name the grade: Standard/Production, ACS, USP, HPLC or High Purity.
  3. Give the pack size, the volume per delivery and your delivery ZIP code.
  4. Request bulk pricing or call 888-255-2401. RightPath returns quotes the same day.

What else do buyers ask about stabilized and unstabilized THF?

What is BHT in THF?

BHT is butylated hydroxytoluene (CAS 128-37-0), an inhibitor added to tetrahydrofuran to slow peroxide formation during storage. The RightPath safety data sheet for BHT-stabilized THF lists it at 0.03% by weight. It slows peroxide formation but does not stop it, so stabilized THF still needs dating and periodic testing.

Does unstabilized THF form peroxides faster?

It has no inhibitor to slow peroxide formation, which is why MIT’s peroxide SOP tests uninhibited THF every 3 months after its safe storage period, against every 6 months for inhibited THF. Buy unstabilized THF in small packs, use it within the manufacturer’s expiration date, and test it before use.

How long does THF last once opened?

MIT’s peroxide SOP sets a safe storage period of 12 months for opened Group B peroxide formers such as THF, or the manufacturer’s expiration date if sooner. After that, inhibited THF is tested every 6 months and before each use, and THF approaching 20 ppm peroxides is disposed of.

Can I use stabilized THF for HPLC?

Use the THF your method specifies. RightPath lists unstabilized THF for HPLC and GPC mobile phases and other additive-sensitive work, and offers both stabilized and unstabilized THF in HPLC grade. If your method does not name a stabilizer status, confirm it with your lab before ordering.

Where can I buy stabilized or unstabilized THF in bulk?

RightPath Industries supplies BHT-stabilized and unstabilized tetrahydrofuran in Standard/Production, ACS, USP, HPLC and High Purity grades, in gallons, pails, drums, totes and bulk, with lot control on request and same-day quotes. RightPath ships from three U.S. warehouses.

Login / Register
Privacy Policy  |  Do Not Sell or Share My Personal Information