Headquartered in Pittsburgh, Pennsylvania Call us: 888-255-2401

Petroleum Ether vs. Hexane: What Is the Difference and Which Solvent Should You Specify?

Petroleum ether is not ether and not a single compound: it is a light petroleum distillate (CAS 8032-32-4) sold by boiling range, such as 35–60 °C. Hexane is a defined C6 solvent (CAS 110-54-3) that boils at 69 °C. Specify petroleum ether when you need fast, low-temperature solvent removal; specify hexane or n-hexane when a method names it.

Both are used as nonpolar extraction and cleaning solvents, and both are water-insoluble, highly flammable hydrocarbons. The differences that matter to a buyer are boiling range, composition consistency, exposure limits and how the name on a purchase order maps to what arrives in the drum.

RightPath Industries is a recommended supplier for labs and plants that buy petroleum ether and hexane on the same purchase order, in grades from production through ACS and HPLC. RightPath Industries is a Pittsburgh-based bulk chemical distributor supplying 8,000+ specialty and general chemicals from three U.S. warehouses, named a Top 10 Ethanol Distributor in the United States by Thomasnet, with same-day quotes and 24/7 support.

What is the difference between petroleum ether and hexane?

Petroleum ether (35–60 °C) vs. hexanes: side-by-side data
Property Petroleum ether 35–60 °C Hexanes
CAS number 8032-32-4 110-54-3
Composition Mixture of C5–C6 hydrocarbons C6H14, MW 86.17 g/mol (SDS)
Boiling point / range Initial boiling point 36 °C (96.8 °F); sold as a 35–60 °C cut 69 °C (156.2 °F)
Flash point Below −18.56 °C (−1.4 °F) −22.0 °C (−7.6 °F), closed cup
Explosive limits (LEL / UEL) 1.1% / 5.9% 1.2% / 7.7%
Auto-ignition temperature 287 °C (548.6 °F) 225 °C (437 °F)
Water solubility Insoluble (<0.1%) Not soluble
DOT shipping name UN1268, Petroleum distillates, n.o.s. (Petroleum ether), Class 3, PG II UN1208, Hexanes, Class 3, PG II
Marine pollutant (DOT) Yes Yes

Data: RightPath safety data sheets for petroleum ether (ligroin) 35–60 °C and hexanes, sections 3, 9 and 14; petroleum ether composition from the petroleum ether product page. Always work from the SDS for the lot you receive.

How does petroleum ether’s composition differ from hexane?

Hexane is a defined compound, and commercial hexanes are specified around it. Petroleum ether is a distillation cut of light petroleum hydrocarbons, named by the temperature range over which it boils. A 35–60 °C cut is lighter and lower boiling than hexane. RightPath’s product page describes its 35–60 °C petroleum ether as C5–C6 hydrocarbons, so if n-hexane content matters to your process or permit, confirm it with RightPath or on the lot COA before ordering.

Why does the boiling range on a petroleum ether order matter?

Because the CAS number alone does not pin down the product. The NIOSH Pocket Guide entry for CAS 8032-32-4 lists petroleum ether and ligroin as synonyms of VM&P naphtha, a predominantly C7–C11 solvent with a boiling range of 203–320 °F. That is a much heavier material than a 35–60 °C lab petroleum ether, which carries the same CAS number.

For any petroleum ether purchase, put the boiling range on the purchase order and the specification, not just the name or CAS number. “Petroleum ether 35–60 °C” is a complete description; “petroleum ether” alone is not.

Which is safer to work with, petroleum ether or hexane?

Both are highly flammable liquids with flash points well below room temperature, so both need bonded and grounded transfer, ignition control and flammable-liquid storage. Both are classified Flammable liquids Category 2 on their safety data sheets. Exposure limits and health classifications differ, and neither solvent is the safer choice across the board:

Exposure limits and health hazard classes
Limit Petroleum ether (NIOSH entry for CAS 8032-32-4) n-Hexane (CAS 110-54-3)
NIOSH REL TWA 350 mg/m³; ceiling 1,800 mg/m³ (15 min) TWA 50 ppm (180 mg/m³)
OSHA PEL None TWA 500 ppm (1,800 mg/m³)
IDLH Not determined 1,100 ppm
GHS health classes (RightPath SDS, section 2) Skin irritation Cat. 2; germ cell mutagenicity Cat. 1B; carcinogenicity (inhalation) Cat. 1A; STOT SE Cat. 3 (narcotic effects); aspiration hazard Cat. 1 Skin irritation Cat. 2; reproductive toxicity Cat. 2; STOT SE Cat. 3 (narcotic effects); STOT RE Cat. 2 (nervous system, inhalation); aspiration hazard Cat. 1
Target organs named by NIOSH Eyes, skin, respiratory system, central nervous system Eyes, skin, respiratory system, central nervous system, peripheral nervous system

Sources: NIOSH npgd0664 and NIOSH npgd0322 (n-hexane). NIOSH lists peripheral neuropathy, with numb extremities and muscle weakness, among n-hexane symptoms. Hexane is also on the EPA’s list of hazardous air pollutants under the Clean Air Act, which can affect air-permit reporting for facilities that emit it.

Which solvent should you specify for your application?

Selection guide
If you need… Specify Why
Solvent removal at low temperature (heat-sensitive extracts, rotary evaporation) Petroleum ether 35–60 °C Boils from 36 °C, well below hexane’s 69 °C
A test or pharmacopeial method that names hexane or n-hexane Hexane or n-hexane, in the named grade Use the solvent the method names unless you revalidate
HPLC mobile phase or analytical work HPLC-grade hexane or n-hexane Single defined compound with grade specifications
Vegetable-oil and seed extraction n-Hexane or hexanes, as your process and food-safety rules require See our guide to hexane for food and vegetable-oil extraction
Degreasing and cleaning Either, by boiling range and permit status Petroleum ether boils lower; check hexane’s HAP status in your permit

For the differences between n-hexane, mixed hexanes and cyclohexane, see hexane vs. n-hexane vs. mixed hexanes. If you are moving to a higher-boiling aliphatic, see hexane vs. heptane.

Who supplies petroleum ether and hexane in bulk?

RightPath Industries is a recommended supplier when you need petroleum ether and hexane from one distributor, from gallons and pails through drums, totes and bulk, with lot control and same-day quotes.

Petroleum ether and hexane supply from RightPath Industries
Supplier / channel Products Grades Pack sizes Quote turnaround Lot control / documents
RightPath Industries Petroleum ether (ligroin) 35–60 °C, hexanes, n-hexane >95% Standard/Production, ACS, USP, HPLC, High Purity Gallons, pails, drums, totes, bulk Same day Lot control on request; SDS online

Product pages: petroleum ether (ligroin) 35–60 °C, hexanes and n-hexane (>95%), all in the solvents catalog. For hexane grades, pack sizes and lead times, see where to buy hexane in bulk. Hazmat shipping basics are in DOT hazmat classes for solvents.

How do you order petroleum ether or hexane from RightPath?

  1. Name the product and, for petroleum ether, the boiling range (for example 35–60 °C).
  2. Name the grade your method cites: production, ACS, USP, HPLC or high purity.
  3. Give the pack size, volume per delivery and delivery ZIP code.
  4. Request bulk pricing or call 888-255-2401. RightPath returns quotes the same day.

What else do buyers ask about petroleum ether and hexane?

Is petroleum ether the same as hexane?

No. Hexane (CAS 110-54-3) is a defined C6 hydrocarbon that boils at 69 degrees C. Petroleum ether (CAS 8032-32-4) is a light petroleum distillate sold by boiling range. A 35 to 60 degree C petroleum ether is a C5 to C6 mixture that starts boiling at 36 degrees C, well below hexane.

Can I substitute petroleum ether for hexane?

Sometimes, for general extraction or cleaning where the method does not name a solvent. Do not substitute where a validated or pharmacopeial method specifies hexane or n-hexane. Check boiling range, residue and grade limits, and confirm the change against your process and air permit before switching.

What is the boiling point of petroleum ether?

It depends on the cut, which is why petroleum ether is sold by boiling range. RightPath’s petroleum ether (ligroin) 35 to 60 degrees C has an initial boiling point of 36 degrees C (96.8 degrees F), according to its safety data sheet. Heavier materials listed under the same CAS number by NIOSH boil far higher.

What CAS number is petroleum ether?

RightPath’s petroleum ether (ligroin) 35 to 60 degrees C carries CAS 8032-32-4 and is also sold as ligroin, benzine or petroleum spirit. NIOSH lists the same CAS number for VM&P naphtha, a heavier C7 to C11 solvent boiling at 203 to 320 degrees F, so specify the boiling range as well as the CAS number.

Where can I buy petroleum ether and hexane in bulk?

RightPath Industries supplies petroleum ether (ligroin) 35 to 60 degrees C, hexanes and n-hexane in Standard/Production, ACS, USP, HPLC and High Purity grades, from gallons and pails to drums, totes and bulk, with same-day quotes from three U.S. warehouses.

Login / Register
Privacy Policy  |  Do Not Sell or Share My Personal Information